How To Transfer A Photo Onto Wood

Transferring a photo onto wood is a fun and creative way to display your favorite pictures. Here are the steps to transfer a photo onto wood:

Materials needed:

• A piece of wood (preferably with a smooth surface)
• A laser printer (not an inkjet printer)
• A photo printed on regular paper with a laser printer (mirrored, if there is text in the image)
• Mod Podge
• A brush or sponge applicator
• A plastic card or scraper
• Sandpaper (optional)

Steps:

1. Start by selecting a piece of wood that you would like to transfer the photo onto. Make sure it has a smooth surface and is free of any debris or dust.
2. Print the photo you want to transfer onto regular paper using a laser printer. If there is text in the image, make sure to mirror the image before printing it.
3. Cut the photo to the exact size of the wood piece.
4. Apply a generous amount of Mod Podge onto the wood, using a brush or sponge applicator. Make sure to spread the Mod Podge evenly over the entire surface of the wood.
5. Carefully place the photo onto the Mod Podge-covered wood, making sure it’s centered and straight.
6. Use a plastic card or scraper to smooth out any bubbles or wrinkles in the photo, pressing down firmly to ensure it adheres to the wood.
7. Let the Mod Podge dry completely for at least 24 hours.
8. After the Mod Podge has dried, dampen a cloth with water and gently rub the paper off the wood. The photo will remain on the wood surface.
9. If there are any remaining paper fibers on the surface, lightly sand them away with sandpaper.
10. Apply a final layer of Mod Podge over the photo to seal it onto the wood and give it a glossy finish.

That’s it! You now have a beautiful photo transferred onto a piece of wood that you can display in your home or give as a gift to someone special. 1.DIY: How To Transfer A Photo Onto Wood – photos printed on regular copy paper are easily transferred onto pallet wood frames using Mod Podge. (via: southernrevivals.com)

All you’ll need (aside from the photo and wood) is some gel medium and Mod Podge. You’ll want to use prints made with some kind of laser printer or copier rather than an ink printer.